iDL520 - Rugged Biometric Mobile Computer

About

The iDL520 multimodal, rugged biometric mobile computer offers enhanced fingerprint reading capabilities along with a set of features for virtually any identity management challenge. Featuring Lumidigm’s Venus multispectral imaging fingerprint sensor, the iDL520 simultaneously reads the surface and subsurface of any finger to capture clear, clean images every time - even when surface features are absent or hard to distinguish due to age, dirt, finger pressure, and skin or environmental conditions. Combined with the on-board contact card and barcode readers, GPS and comprehensive wireless communications, the iDL520 is a truly unique handheld identity management device.

In addition to Lumidigm’s state-of-the-art fingerprint sensor, the iDL520 integrates a smart card reader, a powerful 2D barcode reader and a 3.5” color TFT LCD sunlight-readable display at 320x240 resolution. An integrated 40-key QWERTY keyboard also includes several programmable function keys and the optional pistol grip with trigger button enables one-handed operation. Optional magnetic swipe & OCR/MRZ accessories allow the operator to screen credentials, including passports, e-passports, and a wide array of PIV cards, driver’s licenses and other documents.

This powerful set of personal identity validation features are complemented by 3G UMTS, GSM/GPRS/EDGE, 802.11b/g WiFi, and Bluetooth wireless communications capabilities. Running Microsoft® Windows CE .NET 6.0, the iDL520 offers an open, flexible platform. It is supplied with a comprehensive Software Development Kit to enable fast and easy application development.

Based around MaxID’s award-winning iDL500 design, the iDL520 weighs less than two pounds, the high- impact ABS plastic case is shock tested to survive repeated drops of more than three feet to concrete and is designed to withstand ingress of water and dust. The high capacity Lithium-Ion battery is designed to last a full typical shift. It is hot swappable and easily changed to allow continuity of operation during periods of intensive or extended use.

Ergonomically designed to sit easily in the operator’s hand, the iDL520 is lightweight and provides a unique
handheld identity management tool based around multispectral fingerprint imaging.

Specs

• Multispectral fingerprint imager captures clear, clean images every time
• Read smart card and barcode identity credentials
• Connect using integrated WiFi, Bluetooth and GSM / GPRS wireless links
• Verify identity using biometrics in one mobile unit
  
  

• Core:
• Processor PXA270 @ 520MHz
• RAM 128 MB
• Flash 1GB
• Additional Memory 4 GB micro-SD card as standard (higher capacity cards supported)
• Operating System Windows CE.NET 6.0
  
  
• Peripherals:
• Fingerprint Reader Multispectral imaging 500DPI 0.7” x 1.1” elipse platen size
• Barcode Reader All common 1D & 2D barcodes
• GPS 50 channel high sensitivity GPS receiver
• Contact Card FIPS approved ISO 7816 smart card reader
  
  
• User Interface:
• Display 3.5” , landscape format, 65K color 320 x 240, ¼ VGA active TFT, backlit touch screen
• Keyboard 40 key, QWERTY layout, three application buttons in hand grip, backlight
  
  
• Communications:
• USB USB full speed host/slave, compatible with USB 2.0 hosts. 100mA max supply, supports mass storage and other devices including keyboard and mouse.
• WPAN Class 2 Bluetooth 2.0 / 2.1 + EDR
• WLAN 802.11 b/g WiFi
• WWAN UMTS/HSDPA 7.2Mbps (WCDMA/FDD) 850/1900/2100 MHz Quad-band EGSM 850/900/1800/1900
  
  
• Power:
• Main Battery 5000mAh Lithium-Ion, fuel gauge
• Backup Battery Hot-swap supported via internal super-capacitor
  
  
• Physical:
• Weight 1.8lbs (820g) including battery
• Dimensions (LxWxH) 9 ¼” x 4 ¼” x 3 ¼” (H of 7” with pistol grip)
  
  
• Environmental:
• Operating Temp 15º to 122º F (-10º to 50º C)
• Storage Temp -5º to 150º F (-20º to 65º C)
• Humidity 10% to 90% RH, non-condensing
• Drop Durability Six repeated 4ft (1.2m) drops onto concrete
• Sealing IP66
• Electrostatic Discharge +/- 4kV DC (contact discharge, direct / indirect), +/-8kV DC (air discharge)
  
  
• Regulatory:
• North America / FCC, Europe / CE
  
  
• Included Accessories:
• 12V 3A universal a/c adapter, mains cable, USB cable, two batteries & manual. SDK on request
  
  
• Optional Accessories:
• ISO 7811 compliant Magnetic Stripe reader. ICAO / ISO 7501 compliant OCR-B / Machine Readable Zone (MRZ) reader, stand-alone battery charger, additional batteries, military spec pocket holster with belt attachment