iDL502 - Rugged Mobile Computer

About

The iDL502 multimodal, rugged mobile computer offers a complete set of features for virtually any identity management challenge. On-board contact card, contactless card, prox card, barcode, and optical fingerprint readers combined with a digital camera, GPS, and comprehensive wireless communications make the iDL502 truly unique!

The iDL502 integrates enhanced features for the widest range of identity management applications. Additional card reading capabilities are provided by the combined contactless & smart card reader which is FIPS-201 compliant and has iClass® capabilities, and the integrated prox card reader. Optional magnetic swipe & OCR/MRZ accessories allow the operator to screen credentials, including passports, e-passports, Transportation Worker’s Identification Credentials (TWIC), Common Access Cards (CAC), First Responder Authentication Cards (FRAC), Personal Identity Verification (PIV), FiXs cards, driver’s license, prox cards and other documents. The latest digital camera technology offers fast acquisition of FIPS-201 compliant facial images even under low-light levels.

This powerful set of personal identity validation features are complemented by 3G UMTS, GSM/GPRS/EDGE, 802.11b/g WiFi, and Bluetooth wireless communications capabilities. Running Microsoft® Windows CE .NET 5.0 and 6.0, the iDL502 offers an open, flexible platform. It is supplied with a comprehensive Software Development Kit to enable fast and easy application development.

While the entire device weighs less than two pounds, the high-impact ABS plastic case is shock tested to survive repeated drops of more than three feet to concrete and is designed to withstand ingress of water and dust. At only 9.2” by 4.2” by 2.3”, the unit’s compact size still allows for a 3.5” color TFT LCD display at 320x240 resolution that is readable in sunlight. An integrated 40-key QWERTY keyboard also includes several programmable function keys. The high capacity Lithium-Ion battery is designed to last a full typical shift. It is hot swappable and easily changed to allow continuity of operation during periods of intensive or extended use.

Ergonomically designed to sit easily in the operator’s hand, the iDL502 is lightweight and provides a truly mobile and flexible multimodal identity management tool.

Specs

• Read all PIV and all major prox cards
• Connect using integrated WiFi, Bluetooth and GSM / GPRS wireless links
• Verify identity using multi-modal biometrics in one mobile unit
• Rapidly and efficiently process large amounts of captured data on the spot
  

• Core:
• Processor PXA270 @ 520MHz
• RAM 128 MB
• Flash 1GB
• Additional Memory 4 GB micro-SD card as standard (higher capacity cards supported)
• Operating System Windows CE.NET 5.0 and 6.0
  
  
• Peripherals:
• Fingerprint Reader Optical 500DPI, FIPS201 approved, 0.64” x 0.95” (16.2mm x 24.3mm) window, 480 x 320 pixel image
• Barcode Reader All common 1D & 2D barcodes
• Camera 1.3 MP color, FIPS compliant for facial image capture, LumiLED illumination
• GPS 50 channel high sensitivity GPS receiver
• Contactless Card FIPS approved ISO 14443 proximity and ISO 15693 vicinity card reader
• Contact Card FIPS approved ISO 7816 smart card reader
• Prox Card 125 KHZ FSK; reads all major prox standards
  
  
• User Interface:
• Display 3.5” , landscape format, 65K color 320 x 240, ¼ VGA active TFT, backlit touch screen
• Keyboard 40 key, QWERTY layout, two application buttons in hand grip, backlight
  
  
• Communications:
• USB USB full speed host/slave, compatible with USB 2.0 hosts. 100mA max supply, supports mass storage and other devices including keyboard and mouse.
• WPAN Class 2 Bluetooth 2.0 / 2.1 + EDR
• WLAN 802.11 b/g WiFi
• WWAN UMTS/HSDPA 7.2Mbps (WCDMA/FDD) 850/1900/2100 MHz
  Quad-band EGSM 850/900/1800/1900
  
  
• Power:
• Main Battery 5000mAh Lithium-Ion, fuel gauge
• Backup Battery Hot-swap supported via internal super-capacitor
  
  
• Physical:
• Weight 1.8lbs (820g) including battery
• Dimensions (LxWxH) 9 ¼” (235mm) x 4 ¼” (107mm) x 2 ½” (59mm)
  
  
• Environmental:
• Operating Temp 15º to 130º F (-10º to 55º C)
• Storage Temp -5º to 150º F (-20º to 65º C)
• Humidity 10% to 90% RH, non-condensing
• Drop Durability Six repeated 4ft (1.2m) drops onto concrete
• Sealing IP66
• Electrostatic Discharge +/- 4kV DC (contact discharge, direct / indirect), +/-8kV DC (air discharge)
  
  
• Regulatory:
• North America / FCC, Europe / CE
  
  
• Included Accessories:
• 12V 3A universal a/c adapter, mains cable, USB cable, two batteries & manual. SDK on request.
• Optional Accessories:
• ISO 7811 compliant Magnetic Stripe reader. ICAO / ISO 7501 compliant OCR-B / Machine Readable Zone (MRZ)
  reader, stand-alone battery charger, additional batteries, military spec pocket holster with belt attachment